Republic Steel Locker

Locker Lock Bar Plastic Clip, Used with Penco, Republic and Wilson lockers. Replaces old Spiral Pin. Also known as 4630, 74003, pn3304, lp8831. The dimensions are 1/2" head, for 3/16" hole on lock bars to keep them vertical.

The Republic steel #10, also known Berger #10 locker handle was made from 1960-1962. This was one of the only locker handles Republic Storage used in this time period. However, back them they were called Berger, then Republic-Berger, then Republic Steel, now they go by Republic Storage. The locker handle is 3′ overall length, 13/16′ tall, and 7/16′ wide. The lugs are 3/4′ on center and use a 8/32 x 1/2′ screw for fastening to the lock bar. The locker handle is made of a die cast material and then chrome plated. This Berger Handle is made in the USA, and is shipped with two 8/32′ x 1/2′ screws. Manufactured in the usa. Also known as 70111, 2050, 70002, rs1110, lr311.

The Republic Steel #9 handle, also known Berger #9 locker handle was made from 1959-1960. This was one of the only locker handles Republic Storage used in this time period. However, back them they were called Berger, then Republic-Berger, then Republic Steel, now they go by Republic Storage. The locker handle is 3′ overall length, 13/16′ tall, and 7/16′ wide. Uses one 8/32 x 1/2′ screw for fastening to the lock bar. The locker handle is made of a die cast material and then chrome plated. This Berger Handle is made in the USA, and is shipped with two 8/32′ x 1/2′ screws. Manufactured in the usa. Also known as 70113, 2060, 70003, rs1109.

The Republic Storage #8 locker handle was made from 1936 to 1959. This locker handle was the only locker handle Republic Storage used in that time period. However, back them they were called Berger, then Republic-Berger, then Republic Steel, now they go by Republic Storage. The locker handle is 5-3/8′ long and 1/2′ wide. The screw holes are 3-3/4′ on center. Only 500 or less in stock, special order for more than. The handle is made of a die casting that is then chrome plated. The screws to attached the handle to the locker bar are included with the handle.

Republic Steel Locker Latch Finger Spring, Prior to Current, Manufactured in the USA Also known as 71503, 2775, 70022, rs1115, lr339.

Heat Treated for extra strength. Prior to Current. Manufactured in the USA. Also known as 70501, 2770, 70021, rs1116, lr338.

Not heat treated, Prior to Current. Manufactured in the USA. Also known as 70501, 2770, 70021, rs1116, lr338.

Republic Steel upper locking bar for a two person locker. 700337 spring and 700338 latch included. 7-5/8" length. Prior to current. Facing the locker the hinges will be on the Left side. Also known as 75803, 2790, 70009, rs1124, lr803.

Republic Steel upper locking bar for a two person locker RH. 700337 spring and 700338 latch included. 7-5/8" length. Prior to current. Facing the locker the hinges will be on the Right side. Also known as 75703, 2719, 70010, rs1123, lr703.

Republic Steel upper locking bar for a two person locker. 701730 spring latch included. 7-5/8" length. Current Latching. This is for RH or LH Lockers. Also known as 75701, 2753, rs2000, lr337.

Republic Steel Locker Handle Lift #12 Right Hand (Lift Only). Our replacement Republic Storage Handles are based on the version they produced in the 1970′s, which means more material on the legs (lugs). And our handles are made in the U.S.A. in Wisconsin. The extra material makes them much more heavy duty then the ones they are producing today. We sell the Republic Storage #12 Locker Handle three ways, just the lift, just the case or the complete assembly. The case and the assembly come with the mounting screws. The Republic Storage #12 handle, also goes by Republic Steel #12 handle, and Berger #12 handle. The #12 handle has been produced since the 1965 and is still produced today. Also known as 70103, 2020a, rs1198, lr303.

Republic Steel Locker Handle Lift #12 Left Hand (Lift Only). Our replacement Republic Storage Handles are based on the version they produced in the 1970′s, which means more material on the legs (lugs). And our handles are made in the U.S.A. in Wisconsin. The extra material makes them much more heavy duty then the ones they are producing today. We sell the Republic Storage #12 Locker Handle three ways, just the lift, just the case or the complete assembly. The case and the assembly come with the mounting screws. The Republic Storage #12 handle, also goes by Republic Steel #12 handle, and Berger #12 handle. The #12 handle has been produced since the 1965 and is still produced today. Also known as 70104, 2030a, rs1199, lr304.

Republic Steel Locker Handle Lift #11 Right Hand (Lift Only). Our replacement Republic Storage Handles are based on the version they produced in the 1970′s, which means more material on the legs (lugs). And our handles are made in the U.S.A. in Wisconsin. The extra material makes them much more heavy duty then the ones they are producing today. We sell the Republic Storage #11 Locker Handle three ways, just the lift, just the case or the complete assembly. The case and the assembly come with the mounting screws. The Republic Storage #11 handle, also goes by Republic Steel #11 handle, and Berger #11 handle. The #11 handle has been produced since the 1962-1965.

Right hand or Left hand, prior to 1972. Actual size 13"x7-7/8". Also known as 2753, rs1136, lr21.

Right hand or Left hand, prior to 1972.

actual size 15-3/4"x7-7/8"

Republic Steel Locker Padlock Hasp, Made in the USA.

Republic Steel Handle Latch Rubber Bumper only. Also known as 71301, 2560, 70018, rs1119.

Republic Steel Handle Latch Washer only. Also known as 71701, 2570, 70017, rs1118.

Republic Steel Locker Handle Latch Spring only. Also known as 71505, 2565, 70016, rs1117.

Republic Steel Locker Handle Case #11 & #12 (Case Only). Our replacement Republic Storage Handles are based on the version they produced in the 1970′s, which means more material on the legs (lugs). And our handles are made in the U.S.A. in Wisconsin. The extra material makes them much more heavy duty then the ones they are producing today. We sell the Republic Storage #11 & #12 Locker Handle three ways, just the lift, just the case or the complete assembly. The case and the assembly come with the mounting screws. The Republic Storage #12 handle, also goes by Republic Steel #12 handle, and Berger #12 handle. The #12 handle has been produced since the 1965 and is still produced today. Also known as 70105, 2020b, rs1197, lr305.

Republic Storage Handle Latch Stud Only. Also known as 72009, 2575, 70015, rs1120.

Republic Steel Locker Black Plastic trigger, Used with the lifter and recess handle. Comes with rivet. Also known as 704328, 2150, 70082, rs2010, lr126.

Republic Steel Locker Double Prong Wall Hook, hole spacing 5/8" on centers and are 3/16" diameter material used. The hook projects out 1-7/8".

Republic Steel Locker Single Prong Wall Hook, hole spacing 5/8" on centers and are 3/16" diameter material used. The hook projects out 1-7/8".

Republic Steel Locker Wall Hook & rod bracket, hole spacing 5/8" on centers and are 3/16" diameter material used.

Republic Locker Double Prong Ceiling Hook, hole spacing 1-1/8" on centers and are 3/16" diameter material used. Also known as 71003, 70070, rs1129.

Republic Steel Locker Spring Latch, Used with the lock bars. This is a wire material, also known as 704315, 71501, 70008, rs1125, lr337. Current

Republic Steel Locker Pop Rivet Only for Black Trigger and recessed handle.

REPUBLIC STORAGE SCREW 8-32 X 5/16"

Republic Steel Screw 8-32 x 1/2"

Common screw for Republic & Worley lockers.

Republic steel escutcheon plate/door pull, current. 7134872, 2-1/4" hole spacing.

Republic Steel Equipment Box Locker Friction catch, also used with Interior Steel Equipment. Known as 7134906 and 2290.

Republic Steel Locker door jamb for republic steel current style. Made in the USA. Also known as 70301, 2700, 70020, rs1132, lr333.

Bumper for current door jamb 760017, 1/2" length x 5/16" head and the neck is 1/8".

Republic Steel Locker Door Jamb LH, for Prior to Current. Right hand shown in picture. For locker hinges on the left side facing the lockers. Made in the USA., Hole spacing 2" on centers. Also known as 70304, 2703, 70041, rs1134, lr335.