International Door Closer

View as Grid List

Items 1-36 of 54

per page
Set Descending Direction
Page
  1. International 8600 Dogging Assembly

    The International 8600 Dogging Assembly is used on the 8510S, 8710S, 8610S, 8810S, 8501S, 8710S, and many more.

    INT8600DOG
    $38.33
  2. Push Bar W/Offset Grip PP-2000

    1" Diameter Solid Aluminum Round

    Anodized Finishes, Aluminum or Dark Brown

    Cross bar has a 33-1/16" Center to Center screw spacing

    Mounting Hardware Included

    PP-2000
    As low as $143.33
  3. Door Pull Offset 1" Diameter PH-4000

    Door Pull Offset 1" Diameter PH-4000

    1" Diameter Solid Aluminum Round 3-1/4" Offset Door Pull, usually used on aluminum frame glass doors. This handle offers three different mounting options, one is surface mounted, where the handle is mounted over a mounting stud and then you tighten the set screw to hold the handle in place. The second method is thru bolted, the bolt goes all the way thru the door. And the third is back to were you have two handles mounted back to back.

    Projection 3 -1/4"
    Door Clearance 2 -1/4"
    Center To Center 9". 10' and 12"
    Anodized Finishes Aluminum or Dark Brown
    Mounting Hardware Included

    PH-4000-
    As low as $57.46
  4. Door Sweep 1" Long Rubber

    Door Sweep 1" Long Rubber

    Extruded aluminum rail with a 1" gray rubber seal. Available in aluminum or dark bronze. Screws included.

    International Part # IDC-97V

    IDC97V-
    As low as $21.04
  5. Aluminum Flush Bolt FB-1202

    Aluminum Store Front Door Flush Bolt FB-1202

    15/16" x 4-1/4" radius face, 5-7/32" hole spacing, 1/8" offset, 5/8" throw, 12" rod length, with a square nylon tip with beveled corners fits in a 1/2" square hole.

    FB-2202-
    As low as $17.54
  6. Intermediate Hinge IP-1901 and IP-1902

    Intermediate Hinge IP-1901 and IP-1902

    Cast aluminum construction with steel bearings. The hinge measures 5" high by 2-1/2" wide. This hinge has a 3/4" offset. We find this hinge in the middle section of the door between the top and bottom hinges. Available in the Aluminum color and Dark Brown. See the dimensional information under more views.

    Manufacture Part # IP-1901 and IP-1902
    IP-1901 is for Left Hand Doors
    IP-1902 is for Right Hand Doors

    GIP1901-
    As low as $47.85
  7. Intermediate Hinge IP-2202 and IP-2201

    Intermediate Hinge IP-2202 and IP-2201

    Cast aluminum construction with steel bearings and axle. The set measures 3-1/2" tall with an 1-3/8" projection. This hinge is usually used an an intermediate hinge in between the top and bottom hinge.

    Manufacture part # IP-2202 and IP-2201
    IP-2202 is for Right Hand Doors
    IP-2201 is for Left Hand Doors

    GIP2201-
    As low as $50.64
  8. International Door Closer 1802 - Fixed Spring Closer

    INTERNATIONAL DOOR CLOSER 1802 - FIXED SPRING CLOSER

    • Factory tested to meet or exceed ANSI 156.4 Grade 1
    • Narrow design permits installation on most modern glass and aluminum doors without adapters
    • Two Adjustment Valves: Closing and Latching speeds controlled by separate regulating valves, adjustable after installation.
    • Standard application for regular arm and Top Jamb installation; optional parallel arm installation (requires optional PA bracket.)
    • Slim Plastic Cover or Full Cover (optional)
    • Ranges of Sizes
      Back-Check: 1802, 1803, 1804, and 1805
    • 5 year warranty
    • All Weather Fluid

    3/4" X 9-1/16" Hole Spacing

    PLACE AN ORDER HERE FOR THE 1802BC

    1802-
    As low as $84.75
  9. International Door Closer 1803BC - Fixed Spring Closer

    INTERNATIONAL DOOR CLOSER 1803 - FIXED SPRING CLOSER

    • Factory tested to meet or exceed ANSI 156.4 Grade 1
    • Narrow design permits installation on most modern glass and aluminum doors without adapters
    • Two Adjustment Valves: Closing and Latching speeds controlled by separate regulating valves, adjustable after installation.
    • Standard application for regular arm and Top Jamb installation; optional parallel arm installation (requires optional PA bracket.)
    • Slim Plastic Cover or Full Cover (optional)
    • Ranges of Sizes
      Back-Check: 1802, 1803, 1804, and 1805
    • 5 year warranty
    • All Weather Fluid

    3/4" X 9-1/16" Hole Spacing

    PLACE AN ORDER HERE FOR THE 1803

    1803-
    As low as $74.52
  10. International Door Closer 1804BC - Fixed Spring Closer

    INTERNATIONAL DOOR CLOSER 1804BC - FIXED SPRING CLOSER

    • Factory tested to meet or exceed ANSI 156.4 Grade 1
    • Narrow design permits installation on most modern glass and aluminum doors without adapters
    • Two Adjustment Valves: Closing and Latching speeds controlled by separate regulating valves, adjustable after installation.
    • Standard application for regular arm, Top Jamb installation and Parallel arm installation.
    • Slim Plastic Cover or Full Cover (optional)
    • Ranges of Sizes
      Back-Check: 1802, 1803, 1804, and 1805
    • 5 year warranty
    • All Weather Fluid

    3/4" X 9-1/16" Hole Spacing

    PLACE AN ORDER HERE FOR THE 1804BC-P

    1804-
    As low as $84.75
  11. International Door Closer 1805BC - Fixed Spring Closer

    INTERNATIONAL DOOR CLOSER 1805BC - FIXED SPRING CLOSER

    • Factory tested to meet or exceed ANSI 156.4 Grade 1
    • Narrow design permits installation on most modern glass and aluminum doors without adapters
    • Two Adjustment Valves: Closing and Latching speeds controlled by separate regulating valves, adjustable after installation.
    • Standard application for regular arm and Top Jamb installation; optional parallel arm installation (requires optional PA bracket.)
    • Slim Plastic Cover or Full Cover (optional)
    • Ranges of Sizes
      Back-Check: 1802, 1803, 1804, and 1805
    • 5 year warranty
    • All Weather Fluid

    3/4" X 9-1/16" Hole Spacing

    PLACE AN ORDER HERE FOR THE 1805BC

    1805BC-
    As low as $84.75
  12. International Door Closer 200 Series Overhead Closer

    International Door Closer 200 Series Overhead Door Closer

    UL Listed
    Built in positive back stop and hold open positions.
    Two speed control valves: Closing and latching speeds controlled by separate regulating valves, fully adjustable after installation.
    Positive centering for alignment and to hold door closed against any normal wind or draft.
    Stable hydraulic door check fluid for any climatic operation and constant lubrication.

    Hydraulic Cylinder only

    2000-B-230 105 with Hold Open
    2000-B-231 105 with No Hold Open
    2000-B-232 90 with Hold Open
    2000-B-233 90 with No Hold Open

    2000-B
    As low as $166.95
  13. International Door Closer 3010-DP Bottom Pivot

    International Door Closer 3010-DP Bottom Pivot

    Adjustable dual purpose bottom pivot set

    International Part # 3010-DP

    3010-DP-
    As low as $34.65
  14. International Door Closer 300 Series Adjustable Power

    International Door Closer 300 Series Adjustable Power

    UL Listed, Barrier Free Operation to Comply with Federal Accessibility Standards (ADA) ANSI A117.1.   Spring Power adjustable for a range of sizes from 8-1/2 lbs t Medium Spring Tension, fully adjustable after installation.

    Hydraulic Cylinder only

    3000-B-310 105 with Hold Open
    3000-B-311 105 with No Hold Open
    3000-B-312 90 with Hold Open
    3000-B-313 90 with No Hold Open

    3000-B
    As low as $208.95
  15. International Door Closer 3010-S Side Load Arm

    The International Door Closer 3010-S Side Load Arm is used with the 200, 300 and 500 Series Concealed Overhead Door Closer for Center Hung Doors.   The arm is constructed of cast iron and measures 10" long, and 7/16" thick.   The package includes all the mounting screws.

    3010-S
    $36.82
  16. International Door Closer 5000 Series

    International Door Closer 5000 Series

    1. ADA (Handicap) multi-sized closer with adjustable spring power
    2. Adjustable spring power 8 1/2 lbs to Size 5; Adjustable after installation
    3. Rack and pinion mechanism is contained in a high tensile precision cast aluminum housing
    4. Finishes available in Aluminum (AL), Hardware Bronze - Storefront Bronze (DU)

    Ships with regular arm and parallel arm bracket

    Hole spacing 3/4" x 12"

    5001-
    As low as $153.41
  17. International Door Closer 8050 Series

    International Door Closer 8050

    This closer is an ideal replacement closer for just about any Store Front Door. We recommend this closer because it will fit any size door, and you can adjust the spring tension to make it easier for the elderly, smaller children and the handicapped. This door closer will work on a Right or Left Hand Door, Push or Pull side or Top Jamb mounting, it ships with a parallel arm bracket, arm and mounting screws.

    Length of Closer 9-3/4”, Horizontal Mounting Holes 9-1/16”, Vertical Mounting Holes 3/4”, Overall Height 4-21/32”, Height of Closer 1-21/32”, Projection from Door 2-29/32”, 4 Adjustments - Closing and Latching Speed, Power and Back Check.

    We ship the 8051-TP DU or 8051-TP AL depending on the color you choose. This closer includes a full plastic cover

    8050-
    As low as $112.51
  18. International Door Closer 8052 Delayed Action

    International Door Closer 8052 Delayed Action

    Same closer as the 8050 Series or 8051P, but with Delayed Action. Delayed Action is a function of the Door Closer hydrualic cylinder. The hydrualic cylinder will hold the door open for up to 30 seconds to allow physically challenged individuals time to get through the door way. Adjustable spring power with separate valves for closing, latching and delay

    International Door Closer model # 8052-P DU or 8052-P AL

    8052-
    As low as $127.12
  19. International Door Closer 9001 Series

    International Door Closer 9001 Series

    1. ADA (Handicap) multi-sized closer with adjustable spring power
    2. Adjustable spring power 1 through 6 (adjustable after installation)
    3. Precision cast aluminum housing with forged steel arm
    4. Stable hydraulic door check fluid for any climate operation. Using a fire resistant oil with an
    operating range from -43.6°F (-42°C) to 140°F (60°C)
    5. Standard sweep and latch speed
    6. Standard adjustable backcheck or without backcheck
    7. Two speed control valves allow closing and latching speeds to be controlled by separate
    valves; fully adjustable after installation
    8. Standard Tri-packed for regular arm, top jamb and parallel arm application
    9. Numerous accessories are available to allow for special installations or adaptability
    10. Finishes available in Aluminum (AL) and Duronodic (DU)

    3/4" X 11-3/32" Hole Spacing

    9001P-
    As low as $110.25
  20. International Door Closer CI44 Series

    International Door Closer CI44 Series

    1. Recommended for High Traffic doors
    2. Rugged Cast Iron Body with forged steel arm
    3. Double heat treated steel pinion
    4. All weather fluid
    5. Non-handed
    6. Non-sized adjustable 1-6; standard with Backcheck

    Direct replacement for the LCN 4040

    44CI-
    As low as $182.64
  21. Plunger Type Holder / Stop DH6000

    Plunger Type Holder / Stop DH6000

    Zinc Alloy Construction
    Non-Marking Rubber Tip
    7" Body Height
    1.142" throw
    Mounting Screws Included
    Made by International Door Closer

    GDH6000-
    As low as $26.30
  22. International Flushbolt Standard Guide

    The International Flushbolt Standard Guide is the piece that fits into the top or bottom of the door and acts as a guide for the Flushbolt Rod.  The piece measures 1-3/8" x 1-1/2".  The square hole in the piece is a 1/2" square.  The manufacture part number is FG-1200.

    FG1200
    $2.19
  23. International 5510S Rim Device

    International 5510S Rim Device-Light Duty

    All devices are non-handed design
    Auxiliary guarded latch deadlocks latch bolt automtically locks when the door is closed
    High shock-resistant latching mechanical design or protection from vandalism
    All inside components are made of high rust-resistant alloy or heavy electroplated steel

    Standard 36”: Device length is 33 15/32” (850mm) for 3’ door use, with a standard push bar.
    Long 48”: Device length is 44 3/4” (1137mm) for 4’ door use, with long push bar.

    5510S-
    As low as $150.02
  24. International 5530S Surface Vertical Rod Device

    International 5530S Surface Vertical Rod Device-Light Duty

    All devices are non-handed design
    Auxiliary guarded latch deadlocks latch bolt automtically locks when the door is closed
    High shock-resistant latching mechanical design or protection from vandalism
    All inside components are made of high rust-resistant alloy or heavy electroplated steel

    Standard 36”: Device length is 33 15/32” (850mm) for 3’ door use, with a standard push bar.
    Long 48”: Device length is 44 3/4” (1137mm) for 4’ door use, with long push bar.

    Standard vertical rod accommodates 7’ or 8’ doors

    We offer the aluminum and dark bronze finish online, the polished brass and stainless steel finishes are available.

    5530S-
    As low as $269.80
  25. International 58L Escutcheon Trim

    International 58L Escutcheon Trim for the 5000 Series Devices

    Non-handed, easily install with exit device Escutcheon plate measures 8-1/16" tall by 2-5/8" wide by 29/32" thick. We offer 3 functions, Classroom, Passage and Storeroom.

    Classroom - cylinder (not included) locks and unlocks lever handle-Most Popular
    Passage - no cylinder hole, lever always active
    Storeroom - cylinder (not included) unlocks lever, but lever is always locked when key is removed.

    58L01-
    As low as $106.24
  26. International 53K01 Lever Trim

    International 53K01 Lever Trim

    The International 53K01 Lever Trim is for the 5000 Series International Door Closer exit device.  The rose diameter is 3-3/8", with a lever length of 4",  and the projection is 3".  Available in Aluminum or Dark Bronze colors.   Available in Classroom and Storeroom functions.   Classroom function the  key locks and unlocks the Lever Handle, if you turn the key one way it is  only unlocked for that one passage, if you turn the key the other way, the Lever is unlocked until it is locked again.   Storeroom/Night Latch function the Lever is always locked.

    53K01-
    As low as $90.58
  27. International 7100 Concealed Vertical Rod Device

    International 7100 Concealed Vertical Rod Device

    Modern flat touch bar Concealed Vertical Rod Device Panic exit device. This series offers durability, safety and meets the security demand and access control needs of today. Series 7300 Rim Panic exit devices are used with Narrow, Medium and Wide aluminum door and Hollow Metal and Wood Door applications. Series 7300 is non-handed, Field Reversible for LHRB or RHRB doors. Outside Unlatching and Dogging by Cylinder Key or Dogging by Hex Key in Touch Bar. Standard Units for 36” and 48” in widths (cut bar to fit). Can be used on 30” wide doors.

    7101-
    As low as $255.70
  28. International 7300 Rim Device

    International 7300 Rim Device

    Modern flat touch bar Rim Panic exit device. This series offers durability, safety and meets the security demand and access control needs of today. Series 7300 Rim Panic exit devices are used with Narrow, Medium and Wide aluminum door and Hollow Metal and Wood Door applications. Series 7300 is non-handed, Field Reversible for LHRB or RHRB doors. Outside Unlatching and Dogging by Cylinder Key or Dogging by Hex Key in Touch Bar. Standard Units for 36” and 48” in widths (cut bar to fit). Can be used on 30” wide doors.

    7301-
    As low as $219.94
  29. International 8610S Rim Device-Grade 1

    International 8610S Rim Device-Grade 1

    DC 8000 Series Exit Devices are heavy duty and designed for heavy traffic applications. The devices are Underwriters Laboratory (UL, USA and ULC, Canada) listed for Panic Exit Hardware or Fire Exit Hardware, and are certified to ANSI A156.3-2001 Grade 1.

    Non handed, 4-1/2" minimum stile width. Smooth Surface.

    8610S-
    As low as $471.93
  30. International 8630S Surface Vertical Rod Device-Grade 1

    International 8630S Surface Vertical Rod Device-Grade 1

    DC 8000 Series Exit Devices are heavy duty and designed for heavy traffic applications. The devices are Underwriters Laboratory (UL, USA and ULC, Canada) listed for Panic Exit Hardware or Fire Exit Hardware, and are certified to ANSI A156.3-2001 Grade 1.

    Non handed, 4-1/2" minimum stile width. Smooth Surface.

    For doors 29" to 36" wide order the Size 30 to 36"
    For doors 36" to 48" wide order the Size 48"

    8630S-
    As low as $634.83
  31. International 89L Escutcheon Trim

    International 89L Escutcheon Trim

    Clutched lever trim for use with the 8000 Series International Door Closer Exit Devices. Escutcheon measures 8-27/32" high by 2-15/16" wide by 15/16" thick. Trim is non handed and easily converted in the field. We offer 3 functions, Classroom, Passage and Storeroom.

    Classroom - cylinder (not included) locks and unlocks lever handle
    Passage - no cylinder hole, lever always active
    Storeroom - cylinder (not included) unlocks lever, but lever is always locked when key is removed.

    89L01-
    As low as $234.16
  32. International 8000 Series End Cap

    The International 8000 Series End Cap is used on the hinge side of the the exit device.  This cap includes the mounting bracket and the mounting screws.   It is constructed of a die cast metal for years of service.  The piece measures 2-3/8" by 2-1/4" by 1-1/2".  This end cap is used on the International Door Closer models, 8510S, 8610S, 8710S, 8810S, 8620S, 8530S, and 8650S devices, along with the same devices ending in F.    

    INT8600EC-
    As low as $23.37
View as Grid List

Items 1-36 of 54

per page
Set Descending Direction
Page