Generic

Lockers

Selling School Lockers and Parts for over 35 years. All Steel Locker, ASI, Aurora Steel, Edsal, Interior Steel, Lyon Metal, Medart, Penco, Republic Steel (Berger), Wilson (Tennsco), Worley and Superior List Industries lockers are Manufactures we work with. We also Manufacture over 30 locker handles, springs, door jambs, nylon latch fingers and more in the U.S.A. for the past 35 plus years. Most locker parts are in stock for fast shipping. Master Locks,Zephyr Locks, Digilocks & Lockers are Shipped straight from the Factory to the customer. If in doubt send a picture to jameyg@robertbrooke.com
Robert Brooke Locker Parts Catalog

View as Grid List

22 Items

per page
Set Descending Direction
  1. Heavy Duty Locker Door Knob

    Heavy Duty Locker Door Knob for Two Person Locker upper doors, includes 703208 Screw. Also known as 70080, bu0113.

    700339
    $1.52
  2. Locker Number Plates

    Locker Number Plates fits most lockers except Lyon. Make sure to add what numbers you are looking for. 1-600 in stock, anything over 4-6 weeks. Only numbers can be on the number plates, No names on plates. Pop rivets included. Hole spacing 1-3/4", Overall size 2-5/16" x 1-1/16". Manufactured in the USA. Also known as 99001, 70072, bu0110, lu122.

    Note: Blank number plates are available and in stock, with no numbers on them. Pop rivets are included. Each number plate you need is quantity one. Ten plates equal qty 10 for ordering. Note 6 numbers is a maximum per number plate.

    #PLATES
    $1.21
  3. Single Prong Hook

    Single Prong Locker Hooks for school type lockers. The hook is made from a metal 3/16" diameter tube x 3-1/4" ht x 2" width. These locker hooks are wall mounted to the locker back or sides. The hole spacing is 3/4" or 1-1/4", the top hole is 1/4" round with the two lower as 3/8" slots. Also known as 9010, 81006, bu0111, lu126, 8697.

    200116
    $0.60
  4. Padlock Locker Staple

    Padlock Locker Staple with angle base. Stamped steel construction with zinc plating, .087" thick. See images under "More View" for dimensional data. Made in the USA. Also known as 30711, bu0114, las104.

    700401
    $1.29
  5. Padlock Locker Staple Flat

    Padlock Staple for Lockers

    Stamped steel construction with zinc plating, .087" thick. Made in the USA.

    700412
    $1.08
  6. Locker Lock Hole Filler Plate

    Lock Hole Filler Plate for Lockers, Hole Spacing 2-3/16"
    Used for covering up the 3 holes that are used for a built in master lock. Made in the USA. Also known as 91003, 70024, bu0115, lu124.

    700504
    $0.58
  7. Slotless Bolt 10-24 x 3/8

    Locker Slotless Bolt 10-24 x 3/8 for locker hinges, number plates, locker sides, tops, bottoms and more.

    702343
    $0.07
  8. Double Prong Locker Hook

    Double prong ceiling hooks are mounted to the inside top of a locker to hang a jacket, hat or other items. The locker hook is made of steel wire then zinc plated for a shiny finish 3/16" diameter. The dimensions top to bottom are 2-5/16" and 3-5/8" overall width. Between hole spacing is 1/2"-1" slot. Also known as 91001, 9005, 81007, bu0112, lu125.

    200197
    $1.20
  9. Ceiling Mount Locker Hooks

    Double Prong Ceiling Hook

    Heavy Duty Zinc Plated Steel Wire.
    2-3/4" height
    3-1/2" wide
    1/4" diameter wire
    7/8" hole spacing

    KC1171
    $2.50
  10. J Hook Ceiling Mount Locker Hook

    J Hook Ceiling Mount Locker Hook zinc plated steel. The overall height is 2-5/8" x 1-7/16" width. The two center mounting holes are 1/2" between screws. Manufacturer's part number is 650-3124. This material is zinc plated steel. 3/16" material used.

    203124
    $0.48
  11. Padlockable Cam Lock Chrome

    Wood locker padlockable cam hasp in chrome plated finish. For up to 1-1/8" thick door and a 3/4" hole in the door for mounting. Known as a Hafele 235.17.200 hasp lock. 

    • Cylinder Length: 1-5/16in.(33mm)
    • Padlockable Faceplate Size: 1-13/16in.(46mm)H x 1in.(25mm)W
    • Maximum Material Thickness: 1-1/8in.(28mm)
    • Hole Diameter:  3/4in. (19mm)
    CAM200
    $20.00
  12. Padlockable Cam Lock Brushed Nickel

    Wood locker padlockable cam hasp in brushed nickel zinc die cast finish. For up to 1-1/8" thick door and a 3/4" hole in the door for mounting. Known as a Hafele 235.17.600 hasp lock. 

    • Cylinder Length: 1-5/16in.(33mm)
    • Padlockable Faceplate Size: 1-13/16in.(46mm)H x 1in.(25mm)W
    • Maximum Material Thickness: 1-1/8in.(28mm)
    • Hole Diameter:  3/4in. (19mm)
    CAM600
    $22.80
  13. Padlockable Cam Lock Black

    Wood locker padlockable cam hasp in black finish. For up to 1-1/8" thick door and a 3/4" hole in the door for mounting. Known as a Hafele 235.17.300 hasp lock. 

    • Cylinder Length: 1-5/16in.(33mm)
    • Padlockable Faceplate Size: 1-13/16in.(46mm)H x 1in.(25mm)W
    • Maximum Material Thickness: 1-1/8in.(28mm)
    • Hole Diameter:  3/4in. (19mm)
    CAM300
    $22.80
View as Grid List

22 Items

per page
Set Descending Direction