American Sanitary Toilet Partition

View as Grid List

12 Items

per page
Set Descending Direction
  1. American Sanitary Slide Bolt Latch

    American Sanitary Slide Bolt Latch Chrome Plated.

    Zamac die cast construction, polished chrome finish. Latch base is 4" high with 2-3/4" hole spacing. Latch bolt is 3-3/16" long by 3/4" wide by 3/16" thick. The latch bolt clearance is 9/16" from the back of the base to the under side of the latch bolt and projects out 15/16". The latch projects out 1-9/16" from the face of the door when installed. Also known as a Bathroom Stall Surface Mounted Slide Bolt Latch. Manufacture part # 5020.

    Shipped with mounting screws.

    9AM500
    $8.60
  2. American Sanitary Keeper Bumper Inswing

    American Sanitary Toilet Partitions Keeper Bumper For 1-1/4" Inswing Square Edge Pilaster Or Post

    Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. The latch bolt slot is 1-9/16" high by 5/16" deep. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for inswinging doors. Also known as a Bathroom Stall Strike and Keeper-Inswing 1-1/4". Manufacture part # 5110

    Shipped with mounting screws.

    9AM450
    $8.50
  3. American Sanitary Top Hinge

    American Sanitary Toilet Partition Top Hinge For 1-1/4" Square Edge Pilaster Or Post

    Chrome plated Zamac die cast construction. The hinge measures 2-1/4" high by 1-1/4" wide. The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 3/8" diameter bushing. Also known as a American Sanitary Bathroom Stall Pivot Hinge Top 1-1/4". Manufacture part # 3790

    A=1-5/8"

    9AM175
    $9.61
  4. American Sanitary Top Pin

    American Sanitary Partitions Top Hinge Pin

    Zinc plated steel construction. The hinge pin is 3/8" diameter by 3-3/4" long. Also known as a Bathroom Stall Door Hinge Pin. Manufacture part # 98544.

    9AM110
    $3.80
  5. American Sanitary Top Hinge Pin 3/8" x 3-1/4"

    American Sanitary Top Hinge Pin For Laminate Partitions

    Threaded steel construction. The top pin measures 3/8" diameter by 3-1/4" long with 5/16-18 threads. It has a screw driver flat slot on one end. Also known as a Bathroom Stall Door Top Hinge Pin. Manufacture part # 98584.

    9AM125
    $3.48
  6. American Sanitary Top Hinge Insert Escutcheon

    American Sanitary Partitions Top Hinge Door Insert For 1"

    Chrome plated Zamac die cast construction. The hinge insert outside dimensions are 2-3/16" wide by 1-5/32" deep by 1-13/16" high. The two holes have a diameter of 13/32". Also known as a Bathroom Stall Door Insert Top 1". Manufacture part # 2400.

    9AM150
    $6.33
  7. American Sanitary Nylon Cam

    American Sanitary Partitions Nylon Cam

    Natural nylon construction. The nylon cam head diameter is 7/8" with an inside diameter of 11/16". The cylinder diameter is 3/4" and has an overall length of 1-11/32". For use with a 5/8" diameter pintle. Also known as a Bathroom Stall Door Hinge Cam. Manufacture part # 98245.

    9AM220
    $3.80
  8. American Sanitary Bottom hinge Insert For 1 Door

    American Sanitary Partition Bottom hinge Insert For 1" Door

    Chrome plated Zamac die casting. The door insert outside measurements are 2-5/16" wide by 1-5/32" deep by 1-3/16" tall. The inside dimensions are 1" and the hex hole measures 3/4". The round hole measures 5/16". Also known as a Bathroom Stall Door Insert - Bottom 1". Manufacture part # 2490

    9AM240
    $5.06
  9. American Sanitary Pintle 5/8"

    American Sanitary Pintle 5/8" Diameter

    Steel and white nylon construction. The Pintle is 5/8" diameter by 2-1/4" overall length with 5/16-18 threaded end. Also known as a Bathroom Stall Bottom Pintle 5/8" Medium Lift. Manufacture part # 98175.

    Shipped with nut and lock washer.

    9AM270
    $4.43
  10. American Sanitary Bottom Hinge

    American Sanitary Toilet Partition Bottom Hinge For 1-1/4" Pilaster Post Chrome

    Chrome plated Zamac die cast construction. The hinge measures 2-1/4" high by 1-1/4" wide and the hole spacing is 1-1/2". The U channel is 2-1/4" by 1-1/4" by 1" deep. The lug projects out 1-5/8" by 1/2" thick with a 5/16" diameter bushing. Also known as a American Sanitaryl Bathroom Stall Pivot Hinge Bottom 1-1/4". Manufacture part # 3290

    Shipped with mounting screws.

    a=1-5/8"

    9AM280
    $9.61
  11. American Sanitary Coat Hook Bumper

    American Sanitary Partitions Coat Hook Bumper

    Chrome plated Zamac die casting construction. Coat hook bumper projects out 3" and has a rubber insert. The hook projects out 1-7/32". The coat hook bumper base is 1-7/16" wide by 2-1/4" high with a hole spacing of 7/8". Also known as a Bathroom Stall Hook. Manufacture part # 4000.

    9AM325
    $3.07
  12. American Sanitary Keeper Bumper

    American Sanitary Partitions Keeper Bumper For 1-1/4" Outswing Square Edge Pilaster Or Post

    Zamac die casting that is polished chrome plated. The strike and keeper is 2-1/2" tall by 1-7/8" wide. The stop sticks out 3/4" and has a rubber bumper on it. The two mounting screws are 1-1/2" on center. This keeper bumper is designed for use on a 1-1/4" Post or Pilaster for outswinging doors. Also known as a Bathroom Stall Strike and Keeper-Outswing 1-1/4". Manufacture part # 5210

    Shipped with mounting screws.

    9AM415
    $8.50
View as Grid List

12 Items

per page
Set Descending Direction